Vibrating Fork Point Level Switch for Solids

Vibrating Fork Point Level Switch for Solids
Vibrating Fork Point Level Switch for Solids
Price And Quantity
  • Piece/Pieces
  • 1
  • Piece/Pieces
  • 12,300INR
    Product Specifications
    • -20 to 80 Celsius (oC)
    • Level Switch
    • Steel
    • For Industrial Use
    • 12 - 55 Volt (v)
    • 125-3000 mm
    • Orange
    Product Description
    We are instrumental in serving to our customers with an excellent quality range of Vibrating Fork Level Switch for Solids. The offered fork level switch is suitable for side as well as top mounting. Apart from this, our Vibrating Fork Level Switch for Solids is perfect for detecting high, low levels in dry powders & fine grained solid applications. Vibrating rod is a single element tunned mechanical element-type level sensing device. Clients can avail this fork level switch from us in different specifications.

    Working Principle:
    1) As part of mechanism of this LSV, its piezo-electric-crystals are driven by its electronics. The agitation of these crystals helps to generate vibratory force inside the fork by creating frequent resonance in internal air.
    2) Generated vibration reaches to maximum level in case the tines are vibrated without any hindrance.
    3) When material comes in contact with fork tines, the resonance is hindered. As its consequence, produced vibration tends to cease.
    4) Existence of material is identified when the vibration amplitude is less than the threshold strength.

    1) Suitable for lumps free granular and powder based substances having up to 10 mm particle size
    2) Ideal for top and side mounting purpose
    3) Available with ECTFE/PFA/PTFE coating to avoid rust causing solids
    4) Highest and lowest fail safe field can be selected
    5) Up to 25 degree C processing temperature
    6) Maximum 20 bar of process pressure 
    1) Firm structure
    2) Available in 15 to 260 VAC and 15 to 80 VDC Universal industrial power supply based options
    3) Energy efficient functioning
    4) Free from calibration
    5) Available in different process connection based options (accessible range starts from 1 thread diameter) as per specific application needs of clients
    6) Switching delay can be programmed as part of its standard feature
    7) Can also be accessed in remote electronic based design to suit precise application needs
    8) Exd variant of this product is meant for Gas Group IIC, T6 in compliance with IEC 600529-2001 and IEC 60079-1-2007.

    Technical Specifications:


    Integral Electronics

    Supply & Output

    Universal Power Supply, DPDT Relay Output
    15 to 80 VDC and 15 to 260 VAC 50/60Hz

    Relay Type and Rating

    Potential Free DPDT Relay Output
    5 A each @ 24VDC or 220VAC


    Integral Electronics for PNP Output

    Supply & Output

    12 to 60 VDC, PNP

    Output Limit

    250mA max. Short Circuit Safe.


    Integral Electronics AC series relay

    Supply & Output

    Two Wire 18 to 260 VAC, Series Relay less than 4mA to release external relay maximum 150mA to magnetize relay

    Output Limit

    Use relays/contactors will less than
    4mA holding current


    Integral Electronics 4-20mA Loop Powered

    Supply & Output

    Two Wire DC 8 / 16 mA
    12 to 60 VDC

    Output Limit

    8mA (-1mA max) / 16mA (+1mA max)


    Remote Electronics

    Supply & Output

    Universal Supply DPDT relay output
    15 to 80 VDC
    15 to 260 VAC 50/60Hz

    Relay Type and Rating

    5 A each @ 24VDC or 220VAC

    Sensor Cable

    Remote electronics require special cable from fork to controller.
    10 meter standard length more available on demand

    Min. Density

    15 gram/litre for D1 (Fork length 150mm)
    75 gram/litre for D2 (Fork length 125mm)
    500 gram/litre for D3 (Fork length 100mm)

    Ambient Temp.

    -20oC- 70oC (-4oF- 158oF)

    Process Temp.

    -20oC- 80oC (-4oF- 176oF)

    Extended Process Temperature

    -30oC- 200oC (-22oF- 392oF)
    {250oC available on request}
    (extensions & heat sinks required)

    Process Pressure

    Absolute / max. 15 bar

    Wetted Parts

    SS 316 or SS 316L


    NPT / BSP 1", 1 1/4", 1 1/2", 2" etc
    Flanged : ANSI/JIS/DIN/ASA/custom

    Extensions Tube

    SS 304, SS 316, SS 316L

    Material & Length

    125mm to 3,000mm


    Trade Information
    • 1 Per Week
    • 1 Week
    • Yes
    • Contact us for information regarding our sample policy
    • Cartoon box
    • All India
    • CE
    Related Products
    Conductivity Level Limit Switches

    Send Inquiry
    Steel Level Switches

    Send Inquiry
    Vibrating Fork Level Switches With Flange Connection

    Send Inquiry
    Ash Level Switch

    Send Inquiry
    Threaded Connection RF Admittance Point Level Switch

    Send Inquiry
    Packing Machine Level Switch

    Send Inquiry
    right arrow
    left arrow
    Contact Us

    39, Mangal Nagar, Behind Sai Ram Plaza, Near Rajeev Gandhi Circle - New Sabji Market, Ab Road  Indore  Madhya Pradesh  India  +918035063147
    Phone :+918035063147